product catalogue | terminals | tension clamp technology | modular pe conductor terminals | standard form | 6 mm2 - 1 - general ordering data order no. 1608670000 part designation zpe 6 version earth terminal, 6 mm2, tension clamp connection, wemid, green/yellow, ts 35 ean 4008190259242 qty. 50 pc(s). product notes product description z-series standard ranges provide solutions for conductor cross-sections from 0.05 to 35 mm2. pt okiecex/atex rating data eu-type examination certificate kema97atex2521u download, german kema97atex2521u_d.pdf download english kema97atex2521u_e.pdf iecex certificate of conformity iecexuld05.0009u download iecexuld05.0009u_e.pdf atex conductor cross-section 6 mm2 iecex conductor cross-section 6 mm2 voltage when using cross-connections crossconnectionguide.pdf operating temperature range einsatztemperaturbereich siehe eg- baumusterprfbescheinigung/iecex-certificate of conformity marking en 60079-7 ex e ii marking atex directive 94/9/ec ex ii 2 g d additional technical data colour of insulating material green/yellow connection direction top end plate required yes explosion-tested version "ex e" yes installation advice ts 35 insulating material wemid levels cross-connected internally no
product catalogue | terminals | tension clamp technology | modular pe conductor terminals | standard form | 6 mm2 - 2 - additional technical data no. of identical terminals 1 no. of levels 1 no. of terminal strips per level 2 open sides right operating temperature range - 50 c, + 120 c product family z-series type of connection clamped type of mounting snap-on ul 94 flammability rating of insulation material v-0 version pe terminal csa rating data min. cross-section (csa) awg 20 max. cross-section (csa) awg 8 conductors for clamping (additional connection) flexible with ferrule, min. (din 46228 pt 1) 0.5 mm2 flexible with ferrule, max. (din 46228 pt 1) 6 mm2 conductors for clamping (rated connection) clamping range, min. 0.22 mm2 clamping range, max. 10 mm2 type of connection tension clamp connection 2nd type of connection clamped connection direction top no. of connections 2 stripping length 13 mm blade size 0.6 x 3.5 mm gauge to iec 60947-1 a5 solid, min. 0.5 mm2 solid, max. 10 mm2 stranded, min. 1.5 mm2 stranded, max. 10 mm2 flexible, min. 0.5 mm2 flexible, max. 10 mm2 flexible with ferrule, min. (din 46228/1) 0.5 mm2 flexible with ferrule, max. (din 46228/1) 6 mm2 flexible, min., ferrule with plastic collar (din 46228 pt 4) 0.5 mm2 flexible, max., ferrule with plastic collar (din 46228 pt 4) 6 mm2 awg conductor size, min. awg 22 awg conductor size, max. awg 8 awg conductor size, min. 0.33 mm2 awg conductor size, max. 8.37 mm2 dimensions width 8.1 mm height of lowest version 45.5 mm length 65 mm
product catalogue | terminals | tension clamp technology | modular pe conductor terminals | standard form | 6 mm2 - 3 - dimensions ts 35 offset 32.5 mm pe rating data pen function no pollution severity 3 rated cross-section 6 mm2 rated impulse withstand voltage to adjacent terminal 8 kv rated short-time current 720 a (6 mm2) rated voltage for adjacent terminal 800 v standards iec 60947-7-2 ul rating data min. cross-section (ul) awg 22 max. cross-section (ul) awg 8 approvals approvals institutes downloads dxf 20795_zpe_6_dxf.dxf step 1608670000_20795_zpe6_stp.stp classifications etim 2.0 ec000901 etim 3.0 ec000901 eclass 4.1 27-14-03-05 eclass 5.0 27-14-03-05 eclass 5.1 27-14-03-05 similar products order no. part designation version 7907400000 zpe 6/3an earth terminal, 6 mm2, tension clamp connection, wemid, green/ yellow, ts 35
|
